BetoMats® A1 Class Fiber Cement Safe Rooms Wall Protection
3 cm Vinyl Covered Impact rated polyethylene foam with Dryscreed boards Easy Overlap Edges
BETOMATS®️ WALL and Flooring Element is the best choice for you Safe Rooms. By laying the Wall panels under your actual floor covering, you improve the safety of pschically disturbed Patients and protect their health from various types of damage.
BETOMATS®️ boards are asbestos free, calcium silicate, cement bonded. These multi-purpose boards are easy to handle and offer a superior combination of enhanced technical properties for strong, mechanically self-supporting constructions.
BETOMATS®️ boards are hygroscopic and vapour permeable. Moisture content is therefore automatically regulated by the applicaton environment.
- · Cement fiber boards with Class A fire and impact sound noise protection
- · Optimal thermal insulation with maximum energy efficiency
- · Easy laying of floor coverings of any kind directly on any walls
- · Impact resistant
BetoMAT Product SPECIFICATIONS
BETOMAT PRODUCT SPECIFICATIONS
SECTORS:•Hospitals, Student Safety Rooms for schools• Social Cliniques• Psychiatrie and Drug İnstitutions Hospitals and Nursing homes
BetoBoard BM-40
Non-flammable (A1)
BetoBoard BM-10 Underlay
Ensure optimum fire insulation
BetoBoard BM-50
Suitable for laying on Wall and Flooring
BetoMats Easy Hang
BetoMats BM-60
Wall Board 40mm
BetoMATS BM-40 Wall Floor Boards A1 Class
BetoMats supplied by Otari İnc is designed to be easy to install and use.
BetoMats fibercement screed elements consist of one 10mm or Easy Overlap Edges that are A1 Class
BetoMats fibercement screed elements consist of one 10mm or Easy Overlap Edges that are A1 Class
- Certified A1 Class fire proof Back board
- Impact rated polyethylene foam
- Class B1 DIN 4102 fire rated PVC Vinyl
- 3 cm thick foam
- 65 gr vinyl covering
- Meets ASTM2440 Standards
- Easy Hanging wholes and screws included
- Contains at least 60% recycled pre-consumer material
BetoMats fibercement screed elements consist of one 10mm or Easy Overlap Edges that are A1 Class
BetoMats fibercement screed elements consist of one 10mm or Easy Overlap Edges that are A1 Class
BetoMats fibercement screed elements consist of one 10mm or Easy Overlap Edges that are A1 Class
The right materials to make your project the very safest, it is certified OSB, Impact rated polyethylene foam, and Class “A” fire rated PVC vinyl. Pads are easy to install the 1,2 or 2 inch Thick Impact rated polyethylene foam laminated to 7/16 inch oriented strand board covered in Red Class A fire rated 650 gr/m2 vinyl. 2,5 cm nailing margin top and bottom
Overlap System for easy Wall mount hang
Suitable for Safety Rooms
BetoBoard FB Production Tolerances
Thickness 18 mm Size Tolerances ± 1 mm
Diagonal Tolerances ≤ 2 mm Thickness Tolerances ± 0,9 mm
Board Sizes 600 x 1200 mm
Indoor stationary wall padding panel, intended for direct wall connection. The panel is a wood backed pad of inch Impact rated polyethylene foam bonded to the face using a two-part adhesion process. The foam and wood are covered front and sides then firmly stapled onto the back using Class A PVC Vinyl.
Ideal for Flooring as well
2. Foam Layer - 2 inch polyethylene foam meets standards for ASTM 2440. The test method
quantifies impact in terms of g-max and Head Injury Criterion (HIC) scores. Promotes
closed-loop recycling of post-industrial scrap. Contains at least 60% and up to 100%
recycled pre-consumer raw material. The use of pre-consumer recycled material can
contribute to LEED® certification points.
,
BetoMATS BM-40 Overlap System Wall Floor Boards 600x1200 mm
BetoMats elements are ideally suited for many tasks: fire protection, noise protection,
BetoMats elements are ideally suited for many tasks: fire protection, noise protection,
BetoMats elements are ideally suited for many tasks: fire protection, noise protection,
- Quick and easy to install: twin layered overlap Wall tiles which can be used in a variety of applications. There are less mounting times, your wall is ready to work on the next day!
- Boost safety : Minimal injuries impact resistance for better care of harming of patients
Wall Mount for Do it Yourself
Typical panel manufactured at 60 cm width by specified height.
All columns and corners to be pre-fabricated to fit field condition.
The combination of natural fiber boards and the factory-applied Vinyl Foam Covering
BetoMats elements are ideally suited for many tasks: fire protection, noise protection,
BetoMats elements are ideally suited for many tasks: fire protection, noise protection,
.jpeg/:/cr=t:31.92%25,l:0%25,w:100%25,h:51.34%25/rs=w:600,h:300,cg:true)
- Comes in a handy board size: 1200 x 600 mm, making the boards easy to carry and lay. Also offered in three thicknesses: 40 mm 50 mm, 60 mm 30 mm.
- Non-combustible: A1 fire rated backing board
- Comes in to Sizes: 1200x600 mm or 600x600 mm.
- INSTALLATION 2,5 cm Nail Margin top and bottom along width edge attached directly to wall using appropriate hardware for wall type. Refer to ASTM standards for height above finished floor. 10 cm AFF to bottom of foam current.
As Tile Wall Board in various sizes also available
Suitable for Walls and Floor
SPECIFICATIONS SKU# SPad-2x4WBZ-ClipIn Stock YesProduct Type MatMaterial Type Vinyl covered FoamProduct Edging StraightThickness 2 inchWidth 2.00 feetLength 4.00 feetSF per Item 8.00 Weight 16.80 lbs
Packaging Shrink Wrapped on PalletsNumber of Pieces per Package Type 1Non Absorbent NoSpecial Adhesives YesInterlock Loss 0.00 feetInterlocking Connections NoMade In TURKEYSurface Finish Smooth, FlatSurface Design Solid colorInstallation Method Direct screw on or Z-ClipUV Treated YesReversible NoBorder Strips Included No
BetoMATS BM-60 DIY for GYM and schools
4 x lower thermal resistance than chipboard Only 28 mm thick dry screed board
4 x lower thermal resistance than chipboard Only 28 mm thick dry screed board
4 x lower thermal resistance than chipboard Only 28 mm thick dry screed board
BetoMats Safety Wall Padding units are vinyl clad foam filled panels adhered to wooden backings which get secured to the walls of the Safety Room with the use of top and bottom nailer strips. The wall pads, which are 120 centimeters tall and usually 60 cm in width, are mounted 15 cm above the floor.
Easy to Hang with pre drilled Hanging Holes
4 x lower thermal resistance than chipboard Only 28 mm thick dry screed board
4 x lower thermal resistance than chipboard Only 28 mm thick dry screed board
A1 non-combustible fire-rated fibre cement board to a height of 180 centimeters , which is more than sufficient for protecting a child or an adult from hurting themselves should they try smashing themselves up against the walls of the room.
BetoMats Specıfıcatıons
BetoMats easy and safe to use
BetoMats
fiber Cement screed elements consist of two 1fiber boards glued together. The two panels are offset from one another so that a 30 mm wide rebate is created.
Suitable for rooms with high levels of moisture, can be used for indoor and outdoor use Rooms with high levels of moisture, such as bathrooms, place high demands on the building material.
BetoMats Boards A1 Class.
Easy laying
The dry screed elements are particularly easy to use because you can lay the actual floor covering directly on Betoboards. They are suitable for all types of floor coverings
Otari Inc.
Avcılar Istanbul Turkey
+90 212 236 23 74
+90 533 899 37 52
,
Site Content
Additional Information
This is a long form text area designed for your content that you can fill up with as many words as your heart desires. You can write articles, long mission statements, company policies, executive profiles, company awards/distinctions, office locations, shareholder reports, whitepapers, media mentions and other pieces of content that don’t fit into a shorter, more succinct space.
Articles – Good topics for articles include anything related to your company – recent changes to operations, the latest company softball game – or the industry you’re in. General business trends (think national and even international) are great article fodder, too.
Mission statements – You can tell a lot about a company by its mission statement. Don’t have one? Now might be a good time to create one and post it here. A good mission statement tells you what drives a company to do what it does.
Company policies – Are there company policies that are particularly important to your business? Perhaps your unlimited paternity/maternity leave policy has endeared you to employees across the company. This is a good place to talk about that.
Executive profiles – A company is only as strong as its executive leadership. This is a good place to show off who’s occupying the corner offices. Write a nice bio about each executive that includes what they do, how long they’ve been at it, and what got them to where they are.
Site İçeriği
Hizmetlerinizin ayrıntılarını verin
Müşteriler, sık sordukları soruları görüntüleyemiyorsa bu bölüm yok demektir. Sunduğunuz hizmetleri anlaşılır bir şekilde sıralayın ve açıklayın. Ayrıca premium bir hizmetinizi öne çıkardığınızdan da emin olun.
Yaklaşan etkinlikleri duyurun
Büyük bir indiriminiz mi var? Sizi ziyaret eden ünlü biri veya önemli farklı bir etkinlik mi var? Bunları mutlaka herkesin öğreneceği şekilde duyurun.
Sizinle ilgili görüş ve referansları paylaşın
Müşterileriniz sizi sosyal medyada övüyor mu? Potansiyel müşterileri sadık müşterilere dönüştürmek için müşterilerinizin harika deneyimlerini paylaşın.
Güncel olarak sunduğunuz fırsatları duyurun
Bir tatil indirimi veya haftalık özel bir indirim mi sunuyorsunuz? Müşterilerinizi bu muhteşem fırsatla heyecanlandırmak için burada duyurun.
Önemli haberleri paylaşın
Yeni bir yer mi açtınız; mağazanızı yeniden mi tasarladınız veya yeni bir ürün ya da hizmet mi eklediniz? Bu haberi kendinize saklamayın; paylaşın, duymayan kalmasın.
SSS’leri görüntüleyin
- various standard formats in stock
- Flexible cutting on request
- Board thickness of 10 - 50 mm possible *
- available in different colors *
- various coatings possible
- can be used for acoustic elements
BetoBoard TG consists of two cement-bound lightweight concrete building boards. Structural calcium silicatesBetoBoard® boards are cement bonded calcium silicate based insulation boards and are asbestos free.
- Fiber Cement boards with effective fire and noise protection (airborne and impact sound)
- Optimal thermal insulation for a pleasant feeling of living with maximum energy efficiency
- Easy laying of floor coverings of any kind directly on the screed panels
- Perfectly suitable for laying on underfloor heating
- Cover area: 0.72 m²
The BetoBoard Flooring System is the best choice for renovating your floor. By laying the screed panels under your actual floor covering, you improve the feeling of living and protect your floor from various types of damage. Improved living qualityThe BetoBoard panels ensure optimum thermal insulation under your floor covering. The screed panels not only provide pleasant room warmth, but also reduce your heating costs at the same time. Normally these are caused by the escape of room heat. In addition, the fiber cement boards offer A1 Class effective fire protection. Airborne and impact sound are also enormously reduced by the sound insulation. Easy layingThe dry screed elements are particularly easy to use because you can lay the actual floor covering directly on the fermacell boards. They are suitable for all types of floor coverings
BetoBoard fiber Cement screed elements consist of two 1fiber boards glued together. The two panels are offset from one another so that a 30 mm wide rebate is created. Suitable for rooms with high levels of moisture, can be used for indoor and outdoor use Rooms with high levels of moisture, such as bathrooms, place high demands on the building material. Guaranteed long-term low prices, advice and service from BetoBoard.
Atako Limited20-22 Wenlock RoadSuite LP44698LondonN1 7GU+44 203 411 2333
VAT NUMBER: 333 7867 74Company Number 11960749